蒸汽回流管的11家公司 ✓ 來自 2 個國家的 B2B 製造商、經銷商和供應商 ✓ 提供快速信息和價格的特別服務 ✓
- 蒸汽回流管 | 天然氣軟管 | 丙烷軟管
可能匹配的其他公司。
03149 Forst (Lausitz), 德國 Technischer Handel -Industriebedarf- MROSE GmbH 經銷商 ✓ 服務提供商 ✓
- 燃氣軟管 | 輸送軟管 | 化學軟管
關於我們
查看更多 The company Borrmann Brenner Berlin GmbH was founded in 1949 in Berlin. During the starting years mainly burners for warming up bitumen for small crafts enterprises, in particular the building and roofing trade, were produced.
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
- Propane tools and burners for cable construction
- Regulating technology and special burners for road building machines
- Burners for other applications and industry
- 燃氣軟管 | 天然氣軟管 | 丙烷軟管
關於我們
查看更多 Künneth & Knöchel was founded in Magdeburg in 1887 and has been manufacturing vulcanizing units for worldwide use.
Every unit is manufactured for a specifi c application. We build units for conveyor belts with fabric or steel cord plies up to a belt width of 3,200 mm. The heating platens and pressure bars we use are made of high-quality special aluminium to give many years of reliable service with a high tensile and bending strength. They are selectively available in the forms rectangular shape or rhombic 16.42°, 22° or 30°.
The electrical heating of the heating platens is realised by flat tube heating elements as well as heating foils. The flat tube heating elements are embedded in stainless steel tubing for protection against rust and moisture. Direct contact of the tubes with the heating platens ensures rapid heating. The heating foils are made of silicone with a temperature resistance up to 220°C. The heat flow is evenly distributed everywhere because the heating foil covers the whole surface.
For rapid cooling, our vulcanizing heating platens are available with optional compressed-air or water cooling system. With the water cooling system the heating platens can be cooled down till 80 °C within 10–15 minutes. The electric controller of our vulcanizing units can be operated alternatively by hand or automatically.
We stock a wide range of spare parts to provide a 24-hour service within Germany. All vulcanizing units are thoroughly tested by qualifi ed specialists prior to delivery, including safety and functional tests according to VDE0100 to ensure the highest standard of quality for our products. Only a perfectly functioning vulcanizing unit ensures a perfectly spliced conveyor belt.
We will be happy to provide a quotation without obligation as well as advice on all aspects of our products.
Every unit is manufactured for a specifi c application. We build units for conveyor belts with fabric or steel cord plies up to a belt width of 3,200 mm. The heating platens and pressure bars we use are made of high-quality special aluminium to give many years of reliable service with a high tensile and bending strength. They are selectively available in the forms rectangular shape or rhombic 16.42°, 22° or 30°.
The electrical heating of the heating platens is realised by flat tube heating elements as well as heating foils. The flat tube heating elements are embedded in stainless steel tubing for protection against rust and moisture. Direct contact of the tubes with the heating platens ensures rapid heating. The heating foils are made of silicone with a temperature resistance up to 220°C. The heat flow is evenly distributed everywhere because the heating foil covers the whole surface.
For rapid cooling, our vulcanizing heating platens are available with optional compressed-air or water cooling system. With the water cooling system the heating platens can be cooled down till 80 °C within 10–15 minutes. The electric controller of our vulcanizing units can be operated alternatively by hand or automatically.
We stock a wide range of spare parts to provide a 24-hour service within Germany. All vulcanizing units are thoroughly tested by qualifi ed specialists prior to delivery, including safety and functional tests according to VDE0100 to ensure the highest standard of quality for our products. Only a perfectly functioning vulcanizing unit ensures a perfectly spliced conveyor belt.
We will be happy to provide a quotation without obligation as well as advice on all aspects of our products.
關於我們
查看更多 Isaflex GmbH, Armaturen und Schlauchtechnik (fittings and hose accessories) is a family-owned business that was founded in 1986 by Messrs. Frankenberg and Meinus.
Our company management always put the reliability and quality of our products front and centre. Our company started doing business in Duisburg.
As we have enjoyed continuous growth, we were able to add four additional locations in Castrop-Rauxel, Frechen, Hilden, and Neuss, where our customers will always find competent experts who can provide them with the expertise and flexible service they require.
Thanks to our long years of experience and the strong ties to our suppliers , our manufacturing and trading company is able to guarantee that the products we make for the segments of mechanical and plant engineering as well as pipeline construction will always reflect a high degree of expertise and work in a reliable fashion.
We also have the right solution for any high-pressure water equipment you may require.
Our company management always put the reliability and quality of our products front and centre. Our company started doing business in Duisburg.
As we have enjoyed continuous growth, we were able to add four additional locations in Castrop-Rauxel, Frechen, Hilden, and Neuss, where our customers will always find competent experts who can provide them with the expertise and flexible service they require.
Thanks to our long years of experience and the strong ties to our suppliers , our manufacturing and trading company is able to guarantee that the products we make for the segments of mechanical and plant engineering as well as pipeline construction will always reflect a high degree of expertise and work in a reliable fashion.
We also have the right solution for any high-pressure water equipment you may require.
關於我們
Hebei Orient Rubber & Plastic Co., Ltd. was set up in 2010. We are a manufacturer integrating produce and export hoses and fittings. For our product, we have 5 series and more than 150 types. The 5 series include industrial hose, thermoplastic hose, hydraulic hose, silicone hose and auto hose. After 13 years' high speed development, we become a group company in 2023.
關於我們
Mantern Industrial Co., Ltd. is engaged in international business since 2012. Our aim is to provide good product with competitive price for our clients.
Our employees in our company have 8-10 years experience. So we have the ability and passion to provice good service to all of our clients. Trust us and you will get much profit!
Our employees in our company have 8-10 years experience. So we have the ability and passion to provice good service to all of our clients. Trust us and you will get much profit!
關於我們
查看更多 The BOA Group is one of the world's leading manufacturers for flexible mechanical elements for the automotive industry and for a wide range of industrial applications. The headquarter is based in Stutensee near Karlsruhe / Germany.
The BOA Group develops, produces and distributes worldwide stainless steel components for motor management, exhaust systems and side components for vehicles. In the industrial division, the BOA Group delivers gas tight and flexible elements for applications in energy technology and technical construction: railway, shipyards, aerospace industry, vacuum technique, measurement and control as well as armatures.
BOA solutions include both standardized products and customized, individual elements developed together with the customer.
The BOA Group develops, produces and distributes worldwide stainless steel components for motor management, exhaust systems and side components for vehicles. In the industrial division, the BOA Group delivers gas tight and flexible elements for applications in energy technology and technical construction: railway, shipyards, aerospace industry, vacuum technique, measurement and control as well as armatures.
BOA solutions include both standardized products and customized, individual elements developed together with the customer.
- 燃氣軟管 | 氧氣管 | 液化石油氣軟管
- 燃氣軟管 | 編織管 | 異型管
蒸汽回流管 - 製造商、經銷商&供應商
沒時間研究 蒸汽回流管？ 隻需填寫我們的快捷服務表單。
IndustryStock團隊會根據您的查詢更快地找到 蒸汽回流管 領域中最匹配的製造商、經銷商或服務提供商，並將您的郵件信息轉發給所需的目標群體。
出於業務需要，您在尋找蒸汽回流管嗎？
出於業務需要，您在尋找蒸汽回流管嗎？IndustryStock 上用於產品服務的搜索引擎不僅提供關於蒸汽回流管的相關搜索結果，而且您還可在此查找除蒸汽回流管之外的更多產品和服務。所有用戶都可免費查閱已注冊的蒸汽回流管製造商和經銷商的所有聯係方式。
請評價本頁內容