校驗裝置  製造商、經銷商、供應商

過程控製是使您的生產超越尋常並達到全新性能水平的關鍵。要控製任何過程，必須首先對其進行精確測量。
這正是布魯克斯儀器成為精密流體測量和控製技術全球領導者的原因。我們實現了精確的過程性能。我們提供的結果始終能夠為客戶奠定競爭優勢。我們服務的行業包括：重工業、石油和天然氣精煉、化學和石油研究、製藥和生物製藥生產、太陽能電池、LED、薄膜、光纖和半導體製造，等等。

DRUCK & TEMPERATUR Leitenberger GmbH was founded in 1969 in Reutlingen, the industrial metropolis of the south-west of Germany. The Swabians, the people of this region, are well known for their enterprising spirit, and thanks to our employees' innovative ideas, we soon built up a large range of instrumentation for the measurement, calibration and registration (logging) of pressure, temperature and level. Our private owned medium-sized company has expanded enormously as a result of development in all our product sectors. Back in 1986, we built and moved into new development-, manufacturing- and office buildings in Kirchentellinsfurt, located near to Reutlingen and Tübingen in the south of Stuttgart. The buildings has been extended steadily since then. Here we have the perfect base from which to provide even more flexible service.
The direc communication with our customers allow us to maintain a good price-performance ratio with high quality standards.

HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.