高壓試驗  製造商、經銷商、供應商

HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.

The GLOBE Group was founded in 1986. Since then our focus has been on developing, producing, advising and sales of air motors, gas boosters, high pressure test equipment and systems.
Within the GLOBE group you will find two specializations. The focus of GLOBE Airmotors is mainly on the sales of the air motors while for GLOBE Test Equipment the focus is mainly on the sales of the high pressure test equipment and –systems.
In 2012 we added a German Establishment to the GLOBE group, something we are very proud of. Beside the German establishment, we use a worldwide distributor network to sell our products. As specialists we keep close contact with our customers, establishments and distributors. A positive business atmosphere and excellent service and quality, are very important for us.
As a team of experts with lots of experience, we are here to help you with all your questions about air motors, high pressure equipment and –systems and everything that is related to this matter. A big benefit is that we have our own production department. Because of this, we do not just exactly know what we sell, we can also provide customization for all our products.
The GLOBE group has a high standard when it comes to the quality of our products. Pneumatic drives are often applied in explosive atmospheres. That is why almost all of our air motors, including the gearboxes, are ATEX certificated. We are ISO 9001: 2015 certified to guarantee our work processes and quality.
To give you a clear view of what we offer, we provided a wide delivery program. Here you will find an overview of our product program.

„Energieversorgung und Mobilität von morgen“
Kurze Wege und flache Hierarchien begleiten unser Denken.
Die SL TecH2 wurde als Einzelunternehmen im Jahr 2007 von Dipl. Ing. Stefan Liphardt gegründet und
konnte sich aufgrund seiner hohen Einsatzbereitschaft und Flexibilität rasch als Spezialist im Bereich der Alternativen Antriebe etablieren. Im August 2012 wurde aus dem Einzelunternehmen die SL TecH2 GmbH.
Durch die Projektvielfalt in den Bereichen Automotive Testing, Alternative Antriebe, Produktmanagement sowie Projektmanagement, beschäftigt das Unternehmen
mittlerweile bereits über 20 Mitarbeiter. Unser über die Jahre aufgebautes Spezialwissen rund um das Thema Hochdruckspeichertechnologie bündeln wir nun im Aufbau eigener Infrastruktur zur Durchführung von Hochdruck-, Zyklisierungs-, Sicherheits- und Spezialtests!
Wir kombinieren das Know-How aus der Komponentenentwicklung mit dem Know-How zur Testdurchführung!