造型設備  製造商、經銷商、供應商

Künkel-Wagner was established in 1907 as a mechanical engineering
company specialized in foundry technology. Since then, the headquarters
of the internationally operating company including administration, a
research and development division, fabrication division and project
management is situated in Alfeld (near Hanover).
Since the construction of the very first hand moulding machines in
the year 1911, Künkel-Wagner has considerably contributed to the
advancement of the foundry technology and has developed a wide range of
foundry equipment.
In the late 1950s, Künkel-Wagner was one of the first companies
offering fully automatic moulding plants. Innovative moulding techniques
were developed and the first alternatives to jolt-squeeze moulding
machines presented. It did not take long for us to realise the
importance and relevance of the quality of sand preparation plants for
the casting process and we consequently integrated moulding sand
preparation in our own production programme.
There were concepts for core sand separation as early as in the
1980s. Even today, we continue to meet this early set target and offer
solutions for improved moulding sand quality in moulding plant
technology, as well as in the field of sand processing. With the current
compaction procedure, complicated contours can be produced reliably and
with the necessary strength. Simple casting machines were already built
in early years to round off the production programme; they have
developed into our current automatic pouring equipment.
Throughout the production of the machines of the latest generation,
process relevant parameters are recorded and alarm messages, if
necessary, generated and archived.Thus, the required documentation for
the process control can be guaranteed. In combination with innovation,
expertise and experience, all products boast durability and high-quality
implementation.
“Made in Germany” is backed by long experience and deep know-how and
forms major guiding principles for the development of our company.

BIBRA是一家經驗豐富的製造商和供應商的機械和自製工具的金屬包裝行業全球。我們的客戶使用我們的機器生產各種類型的蓋和端為圓形和非圓形產品，深拉2件和DRD罐，AE-底部，以及扭開-和耳蓋。BIBRA成立於1889年，總部位於德國漢堡附近的Barmstedt。
我們可以依靠超過125年的經驗在包裝行業和幾十年的銷售罐製造機器之前，我們自己製造超過50年現在。我們的模具部門受益於40多年的經驗，在設計，建造和製造模具和工具的所有類型的切割，拉伸和成形模具。
1999年，我們將我們的模具部門搬到了巴姆施泰特，2009年，我們的烤箱部門緊隨其後。因此，我們完成了一個重要的任務，將所有部門集中在一個屋簷下，縮短溝通渠道，運輸和改善質量控製。隨著決定製造我們自己的O形框印刷機在2011年，我們能夠建立完整的自動送紙印刷機生產線與它的後端在一個屋簷下。
我們的製造範圍包括所有類型的壓力機和後端機器，如卷發器，襯裏機，工業烤箱，輥成型機和人體製造商（鎖縫）。此外，BIBRA是唯一能夠為他們的機器和其他人製造自己的衝壓模具和工具的公司之一。
我們的國際成功是通過把客戶放在我們關注的中心來保證的。將質量、靈活性和個人專注結合在一起是你應得的，也是你可以從我們這裏期待的。