液體過濾元件  製造商、經銷商、供應商

工業濾水器係統是許多工業過程的關鍵組成部分，旨在從氣體或液體中去除顆粒、汙染物或特定物質。
他們的主要目標是確保成品的質量，保護設備免受損壞，並確保安全高效的過程。以下是工業過濾係統的一般說明：
目的和功能：

• 保護：過濾器保護係統中的關鍵部件免受汙染物的損壞。
• 純度：在製藥、化妝品或食品飲料等行業，純度至關重要。過濾器有助於確保產品不含不良顆粒或微生物。
• 環境安全：過濾器可以去除有害顆粒或汙染物，確保排放符合環境標準。

類型：

• 袋式過濾器：主要用於液體過濾。它們將廢物固體截留在袋子內，易於更換。
• 離心分離器：利用離心力從氣體或液體中分離出顆粒或液滴。
• 磁性過濾器：設計用於去除液體中的含鐵物質。
• 自清潔過濾器：設計用於自動清除沉積物。

工業濾水器用於各種目的的多個部門。
以下是不同類型工業過濾器的一些典型應用：
水處理及淨化：

• 去除飲用水中的沉積物、汙染物和細菌。
• 在廢水排放到環境中之前對其進行處理。
• 將海水轉化為淡水的海水淡化廠。

暖通空調係統：

• 設備保護：通過過濾微粒，HVAC過濾器保護鼓風機和冷卻盤管等重要部件免受堵塞或損壞。
• 能效：清潔且維護良好的過濾係統可確保最佳氣流，減少空氣通過係統所需的能量，從而降低能源成本。
• 特殊環境：某些設施，如半導體製造或生物研究實驗室的潔淨室，需要非常嚴格的空氣質量標準。這些環境中的HVAC係統通常包含HEPA或ULPA過濾器，以達到必要的清潔度。

餐飲行業：

• 確保啤酒、葡萄酒、果汁和奶製品等產品不含雜質。
• 去除不需要的顆粒以保持味道和透明度。

藥品：

• 淨化藥物生產中使用的水。

發電：

• 過濾發電廠的冷卻水。
• 保護渦輪機免受顆粒物的影響。

電子製造：

• 淨化半導體生產中使用的水。

製漿造紙行業：

• 從造紙用水中去除雜質。
• 製漿過程中分離纖維。

農業：

• 灌溉過濾係統。
• 水產養殖用水處理。

這些應用僅僅觸及了表麵，因為工業過濾器在幾乎每個製造和加工部門都發揮著至關重要的作用，確保了產品質量、環境安全和運營效率。

Filter Type W is a very economical strainer:
Its pressure loss is only 50% in comparison to conventional pot / basket strainers and only 25% in comparison to Y-Filters of same dimension and sieve mesh.
This advantage reduces the cost of pump energy and result in extended reserves until the cleaning cycle. Connectors for the differential pressure are standard from size DN 150 and above (below upon request possible).
The streamlined angle of impact between the flow and the sieve / screen results in a slowly increasing pressure loss, caused by dirt, and at least more than double the operational time before cleaning.
As the cleaning cover is located at the top, the rare cleaning cycle is easily and conveniently carried out. The sieve is a closed basket and simultaneously serves the complete removal of the dirt – hence the remaining medium is already cleaned and can be just drained.
Traditional pot or basket strainers are limited by their horizontal installation in pipelines.
In the past, the option to utilise a strainer also in vertical mounting was only provided by Y-Filters – with its given disadvantages of high flow resistance and inconvenient handling of the cover for removal of the sieve (net weight of the cover, overhead work).
The Filter Type W, however, can be installed in both ways – with its given advantages in regards to minimal pressure losses and low frequency of maintenance.
In addition, equipping the Filter Type W with swivel (horizontal) or swing arm (vertikal) provides the maintenance personnel easier handling of the cover and a crane-independent removal of the sieve – with the dirt for cleaning.

Designed for: hydraulic
Filtration element: basket, strainer
Other characteristics: W
Operating pressure: Min.: 16 bar (232.06psi) / Max.: 100 bar (1450.38psi)

Strainers in pipelines have the following function:
Preventing faults and avoiding damaging of existing plant components;
Cleaning of the flowing medium.
These two primary tasks are valid in all areas of application – regardless whether the media are:

• Hot water (district heating systems)
• Cold water (Cooling Systems, municipal applications)
• Hydrocarbons (pumping of oil, petroleum, LNG/LPG)
• Acids or alkalis (chemical plants).

Generally, these tasks are fulfilled by all commercially available filter types, however with high energy requirement and frequent maintenance intervals. Additional cost for shutdown and cleaning could also be reduced.
Find enclosed a comparison of various filter types, 345 KB (.pdf)
Overall analysis and solution approach
Minimum €500 Mio. additional cost of pump energy arise in German plants every year!
The reason for this is the installation of common strainers with respective high flow resistance figures (ζ = 3 ... 7 and higher).
The Filter Type W offers with its ζ = 0.7 - 2.3 the solution:
efficient + effective= economical