汽缸壓力測量的7家公司 ✓ 來自 4 個國家的 B2B 製造商、經銷商和供應商 ✓ 提供快速信息和價格的特別服務 ✓
- 汽缸壓力測量
- 汽缸壓力測量 | 壓力測量
關於我們
查看更多 HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 汽缸壓力測量 | 壓力計 | 氣缸壓力計
- 汽缸壓力測量 | 壓力測量 | 壓差測量
- 氣缸壓力測量 - 熱效率和機械效率（p-V圖）
描述
查看更多 活塞式發動機氣缸壓力測量方法和設備。
- 汽缸壓力測量 | 壓力測量技術 | 溫度測量
汽缸壓力測量 - 製造商、經銷商&供應商
沒有時間搜索 汽缸壓力測量 的報價？ 請填寫快捷服務表單。
我們的團隊會根據您的要求為 汽缸壓力測量 尋找合適的製造商、經銷商或服務提供商，並將您的要求直接轉發給您要尋找的目標群體。
出於業務需要，您在尋找汽缸壓力測量嗎？
出於業務需要，您在尋找汽缸壓力測量嗎？IndustryStock 上用於產品服務的搜索引擎不僅提供關於汽缸壓力測量的相關搜索結果，而且您還可在此查找除汽缸壓力測量之外的更多產品和服務。所有用戶都可免費查閱已注冊的汽缸壓力測量製造商和經銷商的所有聯係方式。
請評價本頁內容
6 評價 100%