測試報告的15家公司 ✓ 來自 2 個國家的 B2B 製造商、經銷商和供應商 ✓ 提供快速信息和價格的特別服務 ✓
- 測試報告
- 測試報告 | 試驗工作 | 事故預防規範檢查
- 測試報告 | 原始樣品檢驗、初次樣品檢驗 | 連續測試
- 測試報告 | 試驗工作 | 原始樣品檢驗、初次樣品檢驗
- 測試報告 | 試驗工作 | 原始樣品檢驗、初次樣品檢驗
- 測試報告 | 原始樣品檢驗、初次樣品檢驗 | 初次樣板檢測範圍
關於我們
查看更多 HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 測試報告 | 試驗工作 | 檢測策劃
- 測試報告
- 測試報告 | 自動視覺檢測 | 設備檢測
- 測試報告 | 原始樣品檢驗、初次樣品檢驗 | 部件故障檢測
- 測試報告 | 原始樣品檢驗、初次樣品檢驗
- 測試報告 | 原始樣品檢驗、初次樣品檢驗 | 部件故障檢測
- 測試報告
- 測試報告 | 質量檢查 | 處置工藝流程測試
測試報告 - 製造商、經銷商&供應商
沒有時間來搜索 測試報告？ 隻需在服務表單中輸入您的數據。
我們的團隊會根據您的要求為 測試報告 尋找合適的製造商、經銷商或服務提供商，並將您的要求直接轉發給您要尋找的目標群體。
出於業務需要，您在尋找測試報告嗎？
出於業務需要，您在尋找測試報告嗎？IndustryStock 上用於產品服務的搜索引擎不僅提供關於測試報告的相關搜索結果，而且您還可在此查找除測試報告之外的更多產品和服務。所有用戶都可免費查閱已注冊的測試報告製造商和經銷商的所有聯係方式。
請評價本頁內容
13 評價 96%