測量儀器設計的42家公司 ✓ 來自 3 個國家的 B2B 製造商、經銷商和供應商 ✓ 提供快速信息和價格的特別服務 ✓
關於我們
查看更多 Aaronia AG is a manufacturing company of high end RF & MW equipment based in Germany.
Aaronia was founded in 2003 by Mr. Thorsten Chmielus and mainly produces Spectrum Analyzers, Generators, Antennas and Shielding Materials. In 2004 Aaronia shipped its first spectrum analyzer.
In 2008 Aaronia presented a new generation of the SPECTRAN spectrum analyzer, the V4 series. It was the first handheld RF analyzer to reach a sensitivity of -170dBm DANL - a world record.
In 2016 Aaronia released the SPECTRAN V5 series - the world's first and only handheld, real-time spectrum analyzer. The frequency range for the V5 Series was extended from max. 9,4GHz to 20GHz.
Todays purpose of the enterprise is development, trade and sale of measuring equipment, technologies and rights of low and high frequency measurement technique, robotics as well as screening/shielding of RF and E-fields and fundamental research at the segment of communications and measurement engineering, furthermore the construction of own circuitries and measuring methods in particular for the development of extreme sensitive and precise high-frequency measurement devices.
Aaronia was founded in 2003 by Mr. Thorsten Chmielus and mainly produces Spectrum Analyzers, Generators, Antennas and Shielding Materials. In 2004 Aaronia shipped its first spectrum analyzer.
In 2008 Aaronia presented a new generation of the SPECTRAN spectrum analyzer, the V4 series. It was the first handheld RF analyzer to reach a sensitivity of -170dBm DANL - a world record.
In 2016 Aaronia released the SPECTRAN V5 series - the world's first and only handheld, real-time spectrum analyzer. The frequency range for the V5 Series was extended from max. 9,4GHz to 20GHz.
Todays purpose of the enterprise is development, trade and sale of measuring equipment, technologies and rights of low and high frequency measurement technique, robotics as well as screening/shielding of RF and E-fields and fundamental research at the segment of communications and measurement engineering, furthermore the construction of own circuitries and measuring methods in particular for the development of extreme sensitive and precise high-frequency measurement devices.
- 測量儀器設計 - We offer a simple, intuitive evaluation software for the precise analysis, documentation and comparability of flatness re...
- 測量儀器設計 - Lamtech interferometers are based on the principle of grazing incidence of light, thus matte as well as polished parts ca...
- 測量儀器設計 - It is possible to measure parts with a diameter up to 620mm
- 測量儀器設計 - interferometric measuring systems for non-contact flatness measurement of finish-machined as well as polished precision p...
描述
Interferometric measuring systems for non-contact flatness measurement of finish-machined parts.
TOPOS interferometers operate according to the principle of grazing incidence of light. The flatness of also rougher parts can be measured, which show no more fringe pattern with optical flats or Fizeau-interferometers. Next to lapped or ground parts also polished parts can be measured.
技術資料The absolute accuracy is up to 0.1µm over the entire measurement area The time of measurement takes less than 2 seconds Due to the non-contact process, the measurement instruments can be applied in the 100% control Due to the extension by a cross- or rotary table it is possile to measure parts with an outer diameter of 620mm
By default, TOPOS flatness measuring instruments are available with two different sizes of measuring field: with a diameter of 100mm or 50m. An adaptation towards special sizes is possible according to request.
應用領域metal (steel, aluminium, bronze, copper, etc.) ceramic (AL2O3, SiC, SiN, etc.) plastic material (thermoplastic, thermoset etc.) graphite components of fuel and diesel pumps pumps for power steering water pumps cutting tools control valves sealing valves mechanical seals ceramic sealing discs sealing components
查看更多 The parts may consist of diverse materials:
Examples of application areas:
- 測量儀器設計 | 測量裝置製造 | 工業量具、工業測量表
- 測量儀器設計 | 測量裝置製造 | 手動測量儀器
- 測量儀器設計 | 測量儀技術 | 測量裝置
- 測量儀器設計
- 測量儀器設計 | 測量儀技術 | 精密測量儀、精密測試儀表
- 測量儀器設計 | 測量裝置製造 | 工業量具、工業測量表
- 測量儀器設計 | 測量裝置製造 | 測量裝置
- 測量儀器設計
- 測量儀器設計 | 測量裝置製造 | 工業量具、工業測量表
- 測量儀器設計 | 測量裝置製造 | 流量測量儀表
90556 Cadolzburg, 德國 GILGEN Müller & Weigert ZN der General Elektronik GmbH 製造商 ✓ 經銷商 ✓ 零部件供應商 ✓ 服務提供商 ✓
公司檔案 發送詢盤
- 測量儀器設計 | 測量裝置製造 | 電力測量裝置
- 測量儀器設計 | 測量裝置製造 | 工業量具、工業測量表
- 測量儀器設計 | 測量裝置製造 | 測量儀技術
- 測量儀器設計 | 測量裝置製造 | 測量儀技術
- 測量儀器設計 | 測量裝置製造 | 電導率儀
- 測量儀器設計 | 測量裝置製造 | 手動測量儀器
- 測量儀器設計 | 測量裝置製造 | 測量裝置
- 測量儀器設計 | 流量測量儀表
- 測量儀器設計 | 測量裝置製造 | 手動測量儀器
- 測量儀器設計 | 測量儀構件 | 熱傳導效率傳感器
- 測量儀器設計 | 流量測量儀表
- 測量儀器設計 | 坐標測量設備
- 測量儀器設計 | 測量裝置製造 | 手動測量儀器
- 測量儀器設計
- 測量儀器設計 | 測量儀技術 | 分析測試儀器
- 測量儀器設計
- 測量儀器設計 | 電力測量裝置 | 測量儀構件
- 測量儀器設計 | 測量裝置製造 | 測量儀構件
測量儀器設計 - 製造商、經銷商&供應商
使用我們的快捷服務表單並輸入您對 測量儀器設計 的搜索查詢。
IndustryStock團隊會根據您的查詢更快地找到 測量儀器設計 領域中最匹配的製造商、經銷商或服務提供商，並將您的郵件信息轉發給所需的目標群體。
出於業務需要，您在尋找測量儀器設計嗎？
出於業務需要，您在尋找測量儀器設計嗎？IndustryStock 上用於產品服務的搜索引擎不僅提供關於測量儀器設計的相關搜索結果，而且您還可在此查找除測量儀器設計之外的更多產品和服務。所有用戶都可免費查閱已注冊的測量儀器設計製造商和經銷商的所有聯係方式。
請評價本頁內容
30 評價 100%